Table of Contents
Advertisement
Setting a Training Target
The training target feature works with the Virtual Partner feature
so you can train toward a set distance, distance and time, or
distance and speed goal. During your training activity, the device
gives you real-time feedback about how close you are to
achieving your training target.
1
Select Training > Set a Target.
2
Select an option:
• Select Distance Only to select a preset distance or enter
a custom distance.
• Select Distance and Time to select a distance and time
target.
• Select Distance and Speed to select a distance and
speed target.
The training target screen appears, indicating your estimated
finish time. The estimated finish time is based on your current
performance and the time remaining.
3
Select
.
4
Select
to start the timer.
5
If necessary, scroll to view the Virtual Partner screen.
6
After you complete your activity, select
Personal Records
When you complete a ride, the device displays any new
personal records you achieved during that ride. Personal
records include your fastest time over a standard distance,
longest ride, and most ascent gained during a ride.
Viewing Your Personal Records
Select
> My Stats > Personal Records.
Reverting a Personal Record
You can set each personal record back to the one previously
recorded.
1
Select
> My Stats > Personal Records.
2
Select a record to revert.
3
Select Previous Record >
NOTE: This does not delete any saved activities.
Deleting a Personal Record
1
Select
> My Stats > Personal Records.
2
Select a personal record.
3
Select
>
.
Training Zones
• Heart rate zones
(Setting Your Heart Rate Zones, page
• Power zones
(Setting Your Power Zones, page
Navigation
Navigation features and settings also apply to navigating
courses
(Courses, page
7) and segments
page
3).
• Locations and finding places
• Planning a course
(Courses, page
• Route settings
(Route Settings, page
• Map settings
(Map Settings, page
Locations
You can record and store locations in the device.
Marking Your Location
Before you can mark a location, you must locate satellites.
6
> Save Ride.
.
13)
(Segments,
(Locations, page
6)
7)
8)
8)
If you want to remember landmarks or return to a certain spot,
you can mark a location.
1
Go for a ride.
2
Select Navigation >
Saving Locations from the Map
1
Select Navigation >
Point.
2
Browse the map for the location.
3
Select the location.
Location information appears at the top of the map.
4
Select the location information.
5
Select
>
.
Navigating to a Location
1
Select Navigation.
2
Select an option:
• Select Search Tools to navigate to a point of interest, city,
intersection, or known coordinates.
TIP: You can select
• Select Addresses to enter a specific address.
• Select Saved Locations to navigate to a saved location.
TIP: You can select
information.
• Select Recent Finds to navigate to one of the last 50
locations you have found.
• Select
> Select Search Area to narrow your search
area.
3
Select a location.
4
Select Ride.
5
Follow the on-screen instructions to your destination.
Navigating to Known Coordinates
11)
1
Select Navigation > Search Tools > Coordinates.
2
Enter the coordinates, and select
3
Follow the on-screen instructions to your destination.
Navigating Back to Start
At any point during your ride, you can return to the starting point.
1
Go for a ride
(Going for a Ride, page
2
During your ride, select anywhere on the screen to view the
timer overlay.
3
Select
> Navigation > Back to Start.
4
Select Along Same Route or Most Direct Route.
5
Select Ride.
The device navigates you back to the starting point of your
ride.
Stopping Navigation
1
Scroll to the map.
2
Select
>
.
> Mark Location >
.
> Select Search Area > A Map
to narrow your search area.
to enter specific search
.
3).
Navigation
Advertisement
Table of Contents
