Creating A Course From A Recent Ride; Navigating Back To Start; Stopping A Course; Displaying A Course On The Map - Garmin Edge Explore 1000 Owner's Manual

1
Select Courses > Round-Trip Course.
2
Select Distance, and enter the total distance for the course.
3
Select Start Location.
4
Select an option:
• To select your current location on the map, select Current
Location.
NOTE: If the device cannot acquire satellite signals for
your current location, the device prompts you to use the
last known location or to select the location on the map.
• To select a location on the map, select Use Map, and
select a location.
• To select a saved location, select Saved Locations, and
select a location.
• To browse for and select a point of interest, select Search
Tools > POI Categories, select a category, and select a
nearby point of interest.
• To select a city, select Search Tools > Cities, and select
a nearby city.
• To select an address, select Search Tools > Addresses,
and follow the on-screen instructions.
• To select an intersection, select Search Tools >
Intersections, and follow the on-screen instructions.
• To use known coordinates for a location, select Search
Tools > Coordinates, and enter the coordinates.
5
Select Start Direction, and select a direction heading.
6
Select Search.
TIP: You can select to search again.
7
Select a course to view it on the map.
TIP: You can select and
8
Select Ride.

Creating a Course from a Recent Ride

You can create a new course from a previously saved ride.
1
Select Courses > Recent Rides.
2
Select a ride.
3
Select > Save Ride as Course.
4
Enter a name for the course, and select
Riding a Saved Course
1
Select Courses > Saved Courses.
2
Select a course.
3
Select Ride.

Navigating Back to Start

At any point while riding a course, you can return to the starting
point.
1
Tap the screen to view the timer overlay.
2
Select > Where To? > Back to Start.
3
Select Along Same Route or Most Direct Route.
4
Select Ride.
The device navigates you back to the starting point of your
course.

Stopping a Course

1
Scroll to the map.
2
Select > .

Displaying a Course on the Map

For each course saved to your device, you can customize when
and how it appears on the map. For example, you can set your
commute course to always display on the map in yellow. You
can have an alternate course display in green. This allows you
to see the courses while you are riding, but not follow or
navigate a particular course.
4
to view the other courses.
.
1
Select Courses > Saved Courses.
2
Select a course.
3
Select Settings.
4
Select Always Display to make the course appear on the
map.
5
Select Color, and select a color.
6 Select Course Points to include course points on the map.
The next time you ride near the course, it appears on the map.

Viewing Course Details

1 Select Courses > Saved Courses.
2
Select a course.
3 Select an option:
• Select Summary to view details about the course.
• Select Map to view the course on the map.
• Select Elevation to view an elevation plot of the course.
• Select Laps to select a lap and view additional information
about each lap.

Course Options

Select Courses > Saved Courses >
Turn Guidance: Enables or disables turn prompts.
Off Course Warnings: Alerts you when you stray from the
course.
Search: Allows you to search for saved courses by name.
Delete: Allows you to delete all or multiple saved courses from
the device.

Deleting a Course

1
Select Courses > Saved Courses.
2 Select a course.
3
Select > .

Locations

You can record and store locations in the device.

Saving Your Location

You can save your present location, such as your home or
parking spot.
1
From the home screen, select the status bar or swipe down
from the top of the page.
The connections page appears.
2
Select GPS > Mark Location >

Saving a Location from the Map

1
Select Where To? > Browse Map >
2
Browse the map for a location.
3
Select the location.
4
Select the location information at the top of the map.
5
Select > .

Navigating to a Saved Location

1
Select Where To? > Saved Locations.
2
Select a location.
3
If necessary, select to enter search information.
4
Select Ride.

Navigating to a Recent Location

1
From the home screen, select Where To? > Recent Finds.
2
Select a location.
3
Select Ride.
.
.
.
Navigation