Panasonic DMR-EX95V Operating Instructions Manual page 81

If you need help
TV GUIDE
The displayed information is
wrong.
No or incomplete data.
EPG database empty or
incomplete after switching on.
No current data in spite of active
EPG download function.
DVB-T
No station found.
Time not set.
Date/time incorrectly set.
Unusual station sorting.
No teletext
No automatic station allocation in
ShowView.
Which aerial is suitable for
receiving DVB-T?
After the auto setup, there aren't
any stations in the station list
although found stations were
displayed during auto setup.
EXTERNAL INPUT
Video or audio is not recorded
from an external unit.
The broadcasting companies are responsible for the information. Deviations are
possible when changes are made at the last minute.
Date/time incorrectly set.
The signal is too weak or no signal was found.
Check the aerial. Realign the aerial and check the values with the signal quality in
the [Setup] menu.
The broadcasting companies are responsible for the information. Deviations are
possible when changes are made at the last minute.
Downloading the data was not possible. Switch the unit to standby over night.
Activate the EPG Download in the [Setup] menu.
Downloading the data was not possible. Switch the unit to standby over night
Make sure that no Timer Recording was carried out during the time chosen for the
EPB download.
The signal is too weak or no signal was found.
Check the aerial. Realign the aerial and check the values with the signal quality in
the [Setup] menu.
In the Setup menu, switch the active aerial on if you are using an active aerial.
Repeat the auto setup.
The transfer did not work.
Repeat the Automatic Time Setting.
The station sorting of this unit is pre-defined. Use profiles to sort the stations
as you want them.
This DVD Recorder does not support teletext.
No unique code for the digital stations. Allocate the stations manually when
programming for the first time. The DVD Recorder will then recognise the stations
correctly in future.
Any (terrestrial) roof aerial can be used. Room rod aerials are also suitable. Use
an active room aerial if the reception is poor.
[Shipping Condition] was performed or the unit was in the delivery status. The auto
setup was then started and interrupted.
Do an auto setup again and let it continue right through to the end. The data are
only saved after this has been completed.
The external unit is not connected correctly.
The incorrect input channel AV2, AV3 or DV IN was selected.
Page
71
64
72
64
69
64
71
12
18
81