Connection, Av-Link Function - Panasonic DMR-EX95V Operating Instructions Manual

FUNCTIONS
FUNCTIONS
To Others
Setup
TV Aspect
Progressive
Tuning
TV System
Disc
HDMI Settings
Picture
Sound
AV1 Output
Display
AV2 Settings
Connection
Active Antenna
VHS
Others
AV-Link function
Switching between television reception and
the signal from the DVD Recorder. This
function is only possible if the AV1 Output is
set to [Video ( with component )] or
[RGB 2 ( without component )].
DVD recorder signal: Press ENTER + 0.
DVD appears on the display.
Television reception: Press the buttons again.
TV appears on the display.
Setup
AV2 Settings
Tuning
AV2 Input
Disc
Ext Link
Picture
Sound
Display
AV2 Input
Connection
SELECT
RGB / Video
VHS
Others
ENTER
RGB
RETURN
Video
S Video
Not NTSC:
RGB / Video, S Video, Ext Link 1, Ext Link 2
SETUP Setup
4:3
Connection
Off
TV Aspect
PAL
Select the TV screen format of your television. Programmes in 16:9 format are recorded
Video
in 4:3 format. 16:9 format is used to record to RAM.
Letterbox: Black bars appear on the upper and lower edges of the screen.
Off
Progressive
On: The signal is displayed in full-picture quality using COMPONENT VIDEO OUT.
Changeover not possible when HDMI Video Format is set to [Automatic] and when
using the HDMI connection.
TV System
PAL: You connect the unit to a PAL- or multi-system television. Programmes that were
recorded with NTSC are played as PAL60.
NTSC: You connect the unit to an NTSC television. Programmes that were recorded
with NTSC are played as NTSC.
HDMI Settings
HDMI (High Definition Multimedia Interface) is a digital interface for Audio and Video.
One single cable transfers both digital video data (picture data) and also digital audio
data. There is no longer any need to convert analogue-digital or digital-analogue. HDMI
works without data compression so that there is therefore no quality loss from the
system.
AV1 Output
Video ( with component ): Factory-default settings
RGB 1 ( without component ): RGB output is available all the time while this unit is on.
RGB 2 ( without component ): RGB output is available only during playback or
on-screen display. If RGB 1 or 2 is set, there is no signal available on COMPONENT
VIDEO OUT.
If the unit is connected to HDMI, [Video ( with component )] is switched on automatically.
RGB / Video
AV2 Settings
Ext Link 2
AV2 Input
RGB / Video: Is detected automatically.
RGB, Video, S Video: Input is switched to the selected signal.
Ext Link
Ext Link 1:
Ext Link 2:
Active Antenna
On: when connecting an aerial supplied via the power circuit of the DVD Recorder. Start
the Auto-Setup again after making the adjustment and check the Signal Condition.
DVD
Setting
AV2 Input
Ext Link
For digital receivers that send a special recording control signal, for
example, the F.U.N. receiver (TU-DSF41)
External recording control for satellite or digital receivers (video signal).
HDD VHS
Option
ENTER
[16:9] [4:3] [Letterbox]
[On] [Off]
[PAL] [NTSC]
Settings
[Video ( with component )]
[RGB 1 ( without component )]
[RGB 2 ( without component )]
Perform the settings in the
following submenus for the
connected unit.
[RGB / Video] [RGB] [Video] [S Video]
[Ext Link1] [Ext Link 2]
[On] [Off]
SD
ENTER
70 99
64 99
69