Connections; Connection With 21-Pin Scart Cable - Panasonic DMR-EX95V Operating Instructions Manual

Connections

Connections
Connecting to a television only
This unit's rear panel
AC IN
To household mains socket
(AC 220 V to 240 V, 50 Hz)
AC mains lead
4
(included)
Connect only after all other
connections are complete.
To household
mains socket
10 10
Select the connection pattern that matches your environment from patterns A-E.
Choose from one of the connection types A-E that suits your requirement.
Before connection, turn off all connected equipment and read the appropriate
operating instructions.
Use of the supplied RF coaxial cables
To prevent interference patterns from appearing on your TV, use only the supplied RF
coaxial cables when you connect this unit to your TV and aerial outlet or aerial cable,
as shown in connection types A-E.
Keep the RF coaxial cables as far away as possible from other cables.
Do not roll up the RF coaxial cables.

Connection with 21-pin Scart cable

You need a fully wired 21-pin Scart cable for this optimal connection type.
1
Connect the aerial to RF IN (Aerial input) of the DVD Recorder.
2
Connect RF OUT (Aerial output) of the DVD Recorder with the
aerial input of the TV.
3
Connect the AV1 terminal (21-pin Scart terminal) of the DVD Recorder with the
Scart input of the TV.
4
Connect the DVD Recorder and the television to the power supply system.
After completing the above connections, proceed to the Auto-Setup
to tune in TV Channels.
RF coaxial cable
AV OUT
L
OPTICAL
VIDEO OUT
R
AUDIO OUT
4
(not provided)
1
COMPONENT VIDEO OUT
S VIDEO OUT
AV 2 (EXT) AV 1 (TV)
Fully wired 21-pin
Scart cable
(For Q Link functions)
17
AV IN
Television's rear panel
RF IN
Y
P
B
P
R
RF OUT
3 2
RF coaxial cable
(included)
RF IN
A
11