Panasonic DMR-EX95V Operating Instructions Manual page 79

If you need help
PICTURE
No picture.
There is picture interference.
Television reception worsens
when the unit is connected.
The TV picture format is not
set correctly.
No on-screen messages.
Poor picture in spite
of good signal quality.
SOUND
No sound. Distorted sound.
Volume set to quiet.
It is not possible to hear the
desired sound type.
The sound cannot be set for
stereo or NICAM broadcasts.
REMOTE CONTROL
No functions.
The TV cannot be operated.
DISPLAY
The display light is weak.
"0:00" blinks on the unit display.
Check the connection to the TV, e.g. AV1.
The PROGRESSIVE output is activated, but the connected TV is not
progressive-capable.
Press and hold STOP and PLAY
5 seconds. The function is switched to half-picture (INTERLACE).
The [TV System] setting does not match that on the disc.
In STOP mode, press and hold STOP
than 5 seconds. This switches the unit from PAL to NTSC or vice versa.
Check the antenna connection and the alignment of your antenna.
You may need to use a signal amplifier.
Check the [TV Aspect] setting in the Connection Setup menu.
Change the [On-Screen Messages] setting the Display Setup menu.
Overmodulation makes the signal strength display go to red.
Readjust the picture with your room aerial until the picture quality improves.
Check the connections.
If you connected an amplifier, check the input mode.
Switch off the V.S.S. function if it causes problems.
Press AUDIO to select the desired sound type.
Change the appropriate setting in the Sound Setup menu.
The sound cannot be switched on some discs.
Connect external units with audio cables even if you use a digital connection.
You can change the sound type when using DVD-RAM or HDD.
An incorrect remote control code was selected.
Check the batteries.
Point the remote control at the sensor on the unit.
Child protection has been activated.
An incorrect remote control code was selected.
Change the [FL Display] setting in the Display Setup menu.
No time. Set the time in the Others [Clock] Setup menu.
on the unit at the same time for more than
and OPEN/CLOSE on the unit for more
Page
10
19
19
69
69
68
64
10
77
68
18
76
6
5
6
6
6
68
71
79