Jog Mode - Graco Reactor 3 E-20 Standard Operation

Operation

Jog Mode

Mode
Jog Jog Mode
Jog mode has two purposes:
• To speed fluid heating during circulation
• To ease system flushing and priming
Jog Level Level
Jog Jog Level
The jog level determines how quickly the system
will pass chemicals through the system. Jog
levels are between J1 and J20. Lower jog levels
will move fluid at lower speeds and pressures.
Higher jog levels move fluid at higher speeds
and pressures. Actual speed and pressure are
variable based on the chemicals used.
Jog the the System System
Jog Jog the System
NOTE: NOTE: If pneumatic NOTE: pneumatic pneumatic transfer transfer pumps transfer
manually turn on air to the pumps. See your
pump manual, Related Manuals, page 3
electric transfer transfer pumps pumps are in use, the pumps
If electric electric transfer pumps
automatically turn on when the motor is turned
on.
1. Tap the Pump Pump Pump Mode Mode button Mode
2. Select Jog Jog mode from the drop down menu. Jog
3. Tap
4. Tap to start the motor.
5. Tap to stop the motor.
34
pumps are in use, pumps
.
to set the jog level.
Jog the Jog Jog the the Transfer Transfer Transfer Pumps Pumps Separately Pumps
Pneumatic Transfer Transfer Pumps: Pumps: Manually turn
Pneumatic Pneumatic Transfer Pumps:
on/off air to the pumps one at a time. See your
pump manual, Related Manuals, page 3
Electric Transfer Electric Electric Transfer Transfer Pumps: Pumps: Pumps:
1. Ensure the motor power
2. Tap to turn on the A-side transfer
pump. Tap
level.
3. Tap to turn off the A-side transfer
pump.
4. Tap to turn on the B-side transfer
pump. Tap
level .
5. Tap to turn off the B-side transfer
pump.
Jog Limit Limit Feature Feature
Jog Jog Limit Feature
This feature automatically shuts off the Reactor
motor after a specified number of jog cycles.
Tap the check box next to the
enable/disable this feature. When enabled, the
job cycle limit will display and decrement while
the motor is running in jog mode.
The jog cycle limit can be set on the
Pressure/Flow Setup Screen.
Separately Separately
.
is off.
to set the jog
to set the jog
icon to
3A8500B