AGFA Drystar 5301 XL Reference Manual page 36

36 | Drystar 5301 XL, Drystar 5302 XL | Advanced Operation (key-operator mode)
• If you press the confirm key without entering a modality AE-title, the
• If you enter an existing modality AE-title, the following message
12. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Select preferred FILM TYPE for' screen will appear:
13. Press the up/down key to select the preferred film type for this modality.
If the current film type in the trays does not match the selected film type,
the following message is displayed:
\Modality name>
AVAILABLE IN INPUT
TRAY Use the
selected film type?
YES(v)
14. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The data entry for the new modality is now finished.
The printer will ask you if you want to add another modality:
15. If you wish to add another modality, press the Confirm key (YES). You will
be taken back to step 3 to repeat the procedure.
16. If you do not wish to add another modality, press the Escape key (NO).
The printer will return to the Network (DICOM) menu.
Related Links
Accessing the Change settings menu
Data entry
3730D EN 20210520 0952
following message appears:
appears:
Note: You can find the film type on the film packaging.
NO(x)
on page 12
on page 23