AGFA Drystar 5301 XL Reference Manual page 34

34 | Drystar 5301 XL, Drystar 5302 XL | Advanced Operation (key-operator mode)
Accessing the Change settings menu
Data entry
Removing a modality
1. On the Change settings menu, press the Down key three times, followed by
the Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
5 Netmask
6 Router IP-address
7 Remove modality
8 Add modality
2. On the 'Network (DICOM)' screen, press the Down key six times, followed
by the Confirm key to select 'Remove modality'.
The 'Remove modality' screen is displayed:
1 <Modality name>
2 <Modality name>
3
4 etc...
The modality names that have been entered during the installation of the
printer, are shown in the list. If no nickname (daily used modality name)
has been entered, the modality AE-title is shown instead. If a nickname is
also defined during installation, the nickname is used.
3. Select the modality you wish to remove by means of the arrow keys, and
press the Confirm key.
A confirmation screen is displayed:
4. Press the Confirm key (YES) to remove the modality from the list, or the
Escape key (NO) to quit the procedure without any changes.
Related Links
Accessing the Change settings menu
Adding a modality
1. On the Change settings menu, press the Down key three times, followed by
the Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
5 Netmask
6 Router IP-address
7 Remove modality
8 Add modality
3730D EN 20210520 0952
on page 12
on page 23
on page 23