AGFA Drystar 5301 XL Reference Manual page 111

For better accessibility, the tray can be removed from the printer by lifting
it slightly and pulling it out completely.
3. Check if the film feed section of the input tray is clear.
4. Reposition the film stack in the film tray, making sure that all the sheets
are kept correctly in place.
5. Close the film input tray.
Related Links
Film identification problems
Drystar 5301 XL, Drystar 5302 XL | Problem solving | 111
on page 116
3730D EN 20210520 0952