AGFA Drystar 5301 XL Reference Manual page 44

44 | Drystar 5301 XL, Drystar 5302 XL | Advanced Operation (key-operator mode)
6. Press the up/down key to select the desired maximum density setting for
this modality.
7. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Controlling the printer via a remote PC (with browser)
Accessing the Change settings menu
Removing a modality
Adding a modality
3730D EN 20210520 0952
on page 23
on page 34
on page 34
on page 80