AGFA Drystar 5301 XL Reference Manual page 113

WARNING:
The print head unit can be warm.
4. Gently remove the film sheet(s).
Note: Never use force to clear the jammed film. If it is not
possible to gently remove the jammed film by pressing the
transport buttons, proceed with the procedure as follows.
Note: Verify that no film sheets remain in the print head
compartment.
5. If the film jam has been cleared, close the printer. You can resume work.
Drystar 5301 XL, Drystar 5302 XL | Problem solving | 113
3730D EN 20210520 0952