AGFA Drystar 5301 XL Reference Manual page 79

Drystar 5301 XL, Drystar 5302 XL | Advanced Operation (key-operator mode) | 79
1. The printer settings are saved automatically to the internal media.
When 100% is reached, the following 'Save configuration' screen will ask
you to insert the back-up USB flash drive:
2. Insert a USB flash drive.
As soon as the USB flash drive is inserted, the 'Copy' screen is displayed.
C <path><filename>
A <path><filename>
The printer saves the configuration on the external USB flash drive
When the writing of the save set is finished, the printer will ask you to
remove the USB flash drive:
3. Remove the USB flash drive.
As soon as the USB flash drive has been removed, the following screen is
displayed:
Note: The <save set name > is preceded by the characters
"BAC". BAC stands for General backup.
4. Label the USB flash drive with the BAC_<save_set_name> and press the
Confirm key.
The installation is now finished, and the following screen is displayed:
CALIBRATION Option
for further actions
and to fill in the
SITE-SPECIFIC DATA
5. Press the Confirm key to accept the installation or press the Escape key to
redo the installation.
3730D EN 20210520 0952