Power Supply Cable (A-Cb-Xx-Ps-Xx); Table 7-3: Available Power Supply Cables; Figure 7-4: Power Supply Cable; Figure 7-5: Pinout - Fluke MP Series Abridged User Manual

7.7 Power Supply Cable (A-CB-xx-PS-xx)

The power supply cable comes with a three-socket female M16 connector, assigned to the scanner rear three pin
male M16 connector. The corresponding end of the power supply cable is carried out as a pig tail, to connect to
an external power supply device.
The power supply cable is provided in different lengths. The LT version of the cable withstands ambient
temperatures up to 80°C (176°F), the HT version withstands ambient temperatures up to 180°C (356°F).
For information about installation, see section 5.8 Power Supply, page 32.

Figure 7-4: Power Supply Cable

Figure 7-5: Pinout

Table 7-3: Available Power Supply Cables

P/N Length
A-CB-LT-PS-07 7.5 m (25 ft)
A-CB-LT-PS-25 25 m (82 ft)
A-CB-LT-PS-50 50 m (164 ft)
A-CB-HT-PS-08 7.5 m (25 ft)
A-CB-HT-PS-10 10 m (33 ft)
Ambient Temperature
80°C (176°F)
80°C (176°F)
80°C (176°F)
180°C (356°F)
180°C (356°F)
Accessories
Power Supply Cable (A-CB-xx-PS-xx)
7
51