Laser - Fluke MP Series Abridged User Manual

Infrared linescanner
Table of Contents

Advertisement

MP Series
Users Manual, Rev. 1.0, Apr 2021

5.5 Laser

The built-in laser sighting function allows fast and precise aiming at small or rapidly moving targets, or targets
passing at irregular intervals. The laser is specially aligned with the scan line of the linescanner. A small, bright red
laser line shows you the center of the scanned line, not the size of the spots being measured.
The laser is a Class II type laser diode with an output power less than 1 mW and an output wavelength of 650 nm.
The horizontal angle is 70°, non-symmetrically.
The laser can be turned on and off via the scanner runtime software, see menu <Scanner> <Switch Laser on/off>.
The laser automatically turns off for an internal case temperature outside of at < 5°C (41°F) or > 50°C (122 °F)
To preserve laser longevity, the laser automatically turns off after approximately 10 minutes of constant use!
28
Risk of Personal Injury
Avoid exposure to laser light! Eye damage can result.
Use extreme caution when operating!
Never look direct into the laser beam!
Never point directly at another person!
Note

Advertisement

Table of Contents
loading

Table of Contents