BMW M4 COUPE Owner's Handbook Manual page 73

▷ Before a journey, fit the removed head re‐
straints on all occupied seats.
▷ Adjust the head restraint so its centre sup‐
ports the back of the head at as close to
eye level as possible.
▷ Adjust the spacing so that the head re‐
straint is as close as possible to the back of
the head. If necessary, adjust the spacing
using the incline of the seat backrest.◀
WARNING
Objects on the head restraint reduce the
protective effect in the head and neck area.
There is a danger of injury.
▷ Do not fit any covers on the seats or head
restraints.
▷ Do not hang objects such as coat hangers
directly on the head restraint.
▷ Only use accessories that have been clas‐
sified as safe for attaching to the head re‐
straint.
▷ Do not use any accessories, for example
cushions, during the journey.◀
Distance
The spacing is adjusted to the back of the
head using the incline of the seat backrest.
Adjust the spacing so that the head restraint is
as close as possible to the back of the head.
Adjusting the height
The head restraints can be adjusted in height.
Removing
The head restraints cannot be removed.
Memory function
Principle
With the memory function, the following set‐
tings can be saved and called up if required:
▷ Seat position.
Online Edition for Part no. 01402981699 - VI/17
Adjusting
▷ Exterior mirror position.
▷ Height of the Head-Up Display.
General
For each driver profile, see page 56, two mem‐
ory slots can be assigned with different set‐
tings.
Depending on the equipment, the following
settings are not saved:
▷ Backrest width.
▷ Lumbar support.
Safety notes
WARNING
Using the memory function while driving
may cause the seat to move unexpectedly. You
could lose control of the vehicle. There is a
danger of accidents. Only call up the memory
function when the vehicle is at standstill.◀
WARNING
Risk of entrapment when moving the
seats. There is a danger of injury or damage to
property. Before performing the setting, make
sure that the movement area of the seat is
clear.◀
Overview
Saving
1. Switch on the ignition.
2. Set the desired position.
Controls
73