BMW M4 COUPE Owner's Handbook Manual page 59

▷ Online.
6. Select the driver profile to be imported.
Displaying driver profiles when
starting
The driver profiles can be shown every time
the vehicle is started so that the desired profile
to be selected.
Via iDrive:
1. "My Vehicle"
2. "Driver profiles"
3. "Show driver profiles at start"
System limits
It is not always possible to assign a remote
control uniquely to a driver. This may be the
case in the following scenarios:
▷ The front passenger unlocks the vehicle
with their remote control, but another per‐
son drives.
▷ The driver unlocks the vehicle using Com‐
fort Access and is carrying a number of re‐
mote controls.
▷ If there is a change of driver without the ve‐
hicle being locked and unlocked.
▷ If a number of remote controls are located
in the area outside of the vehicle.
Settings
General
Various settings are possible for opening and
closing, depending on the equipment and
country variant.
These settings are saved for the currently
used driver profile, see page 56.
Online Edition for Part no. 01402981699 - VI/17
Opening and closing
Unlocking
Doors
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Doors/Key"
4. "Driver's door" or
5. Select the desired setting:
▷ "Driver's door only"
Only the driver door and fuel filler flap
are unlocked. Pressing again unlocks
the entire vehicle.
▷ "All doors"
The entire vehicle is unlocked.
▷ "Comfort entry"
The entire vehicle is unlocked.
Pressing the button on the remote
control twice in direct succession cau‐
ses the window to be lowered further
when the door is subsequently opened.
Boot lid
Depending on the equipment and country
specifications, these settings may not be avail‐
able.
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Doors/Key"
4. "Tailgate" or
door(s)"
5. Select the desired setting:
▷ "Tailgate"
Boot lid is opened.
▷ "Tailgate and door(s)"
Boot lid is opened and doors are un‐
locked.
Controls
"All doors"
"Tailgate and
59