BMW M4 COUPE Owner's Handbook Manual page 111

Speed Limit Info with
overtaking restriction display
Speed Limit Info
Principle
Speed Limit Info shows the currently detected
speed limit in the instrument cluster.
General
The camera in the area of the interior rear-view
mirror detects traffic signs at the edge of the
road as well as variable overhead signs. Traffic
signs with additional symbols, for example in
wet conditions, are also detected, compared
with internal vehicle data, for example of the
rain sensor, and displayed, depending on the
situation. The system considers the informa‐
tion saved in the navigation system and also
displays the speed limits present on unmarked
sections of road.
Overtaking restriction display
Principle
Overtaking restriction signs and end of restric‐
tion signs that are detected by the camera are
indicated by corresponding symbols in the in‐
strument cluster.
General
The system only considers no passing restric‐
tions and ends of restrictions that are indicated
by means of signs.
Nothing will be displayed in the following situa‐
tions:
▷ In countries in which no passing is primar‐
ily shown by road markings.
▷ On routes without signage.
▷ In the case of railway crossings, lane mark‐
ings and other situations which indicate a
no passing restriction but which are not
sign-posted to this effect.
Online Edition for Part no. 01402981699 - VI/17
Displays
Safety note
WARNING
The system does not release you from
your personal responsibility to assess the visi‐
bility conditions and traffic situation correctly.
There is a danger of accidents. Adapt your
driving style to the traffic conditions. Observe
the traffic situation and intervene actively if the
situation warrants it.◀
Overview
Camera
The camera is located on the front side of the
rear-view mirror.
Keep the windscreen clean and clear in the
area in front of the rear-view mirror.
Switching on/off
Via iDrive:
1. "My Vehicle"
2. "iDrive settings"
3. "Displays"
4. "Instrument cluster"
5. "Speed Limit Info"
If Speed Limit Info is switched on, this can be
shown via the on-board computer on the infor‐
mation display in the instrument cluster.
Overtaking restrictions are also displayed
when Speed Limit Info is activated.
Controls
111