Installation procedures
2
1
Image 4–23 Bottom bracket
1
V3624376 screw M5 x 12
2
V3673791 washer D5,3 D15
7.
Adjust the 4 adjustment points to make sure the lens is correctly positioned. Use a flat screwdriver and
turn the positioning knobs against the lens.
4
2
1
Image 4–24
4.8 Suspending the projector from a truss
WARNING: It is the responsibility of the installer to suspend the reinforcement frame in a safe and
secure fashion. Safety cables must be applied according to local regulations and standards. Safety
cables must be dimensioned for the applicable load and no drop distance is allowed or must be
limited as much as possible.
54
R5914481 /02 XDX
4
3