Mounting The Mains Side Cover - Barco XDX Series Installation Manual

Projector covers
2. Remove the two screws of the mains side cover. Use a T20 Torx screwdriver.
3. Slide the side cover a bit towards the rear side of the projector.
4. Lift up and remove the side cover and take it out of the frame.
Image 7–5

7.4 Mounting the mains side cover

Required tools
Torx screwdriver T20
How to mount
1. Make sure the light source side cover is mounted.
2. Place and slide down the mains side cover.
Image 7–6 Mounting the mains side cover
3. Fasten the side cover using the two screws of the mains side cover. Use a T20 Torx screwdriver.
74 R5914481 /02 XDX