High Brightness Precautions: Hazard Distance - Barco XDX Series Installation Manual

Safety
Electric related safety labels
Label image
CAUTION! DOUBLE POLE / NEUTRAL FUSING HIGH RESIDUAL
VOLTAGE - WARNING : RISK OF ELECTRIC SHOCK SWITCH OFF AND
UNPLUG BEFORE REMOVING THIS COVER. SEE INSTRUCTIONS
BEFORE REMOVING SMPS.
注意 兩極/中性熔斷 高殘餘電壓. 警告：存在觸電風險 移除此蓋板之前， 請先
關機並拔掉電源插頭 移除SMPS之前，請先閱讀說明.
ATTENTION DOUBLE PÔLE / FUSIBLE SUR LE NEUTRE HAUTE
TENSION RÉSIDUELLE - ATTENTION : RISQUE DE CHOCS
ÉLECTRIQUES. ÉTEINDRE ET DÉCONNECTER AVANT OUVERTURE DU
COUVERCLE. LIRE LES INSTRUCTIONS AVANT DE RETIRER LE SMPS.

1.4 High Brightness precautions: Hazard Distance

HD
Hazard Distance (HD) is the distance measured from the projection lens at which the intensity or the
energy per surface unit becomes lower than the applicable exposure limit on the cornea or on the
skin. The light beam is considered (to be) unsafe for exposure if the distance from a person to the
light source is less than the HD.
14 R5914481 /02 XDX
Label description
Disconnect the power to the unit mains terminals
and unplug power cord at UPS inlet before
removing this cover. See ID-label for ratings.
WARNING : HIGH LEAKAGE CURRENT
EARTH CONNECTION ESSENTIAL BEFORE
CONNECTING SUPPLY. SEE INSTALLATION
INSTRUCTIONS BEFORE CONNECTING TO
THE SUPPLY.
Déconnecter l'alimentation des bornes du
réseau et déconnecter le câble de la prise UPS
avant de retirer ce couvercle. Voir l'étiquette
d'identification pour les paramètres.
ATTENTION : COURANT DE FUITE ÉLEVÉ
RACCORDEMENT À LA TERRE
INDISPENSABLE AVANT LE
RACCORDEMENT AU RÉSEAU VOIR LA
NOTICE D'INSTALLATION AVANT DE
RACCORDER AU RÉSEAU
在取下此外殼前，斷開投影機主電源端的電源並
從UPS電源插座上拔下電源線。 額定功率參閱產
品標籤。 警告：大漏電流，在接通電源之前必須
先接地。 在連接電源前請查看安裝說明書
在取下此外壳前，断开投影机主电源端的电源并
从UPS电源插座上拔下电源线。 额定功率参阅产
品标签。 警告：大漏电流，在接通电源之前必须
先接地。 在连接电源前请查看安装说明书。
Label location
Screened on Mains cover
Printed on SMPS cover