Installation Of Ust Lens Support - Barco XDX Series Installation Manual

Installation procedures
Image 4–16 Lens removal
It's recommended to place the lens caps of the original lens packaging back on both sides of the
removed lens to protect the optics of the lens.
It is recommended to place the dust cover of the original projector packaging back into the lens
opening to prevent intrusion of dust.
Image 4–17

4.7 Installation of UST lens support

Required tools
• Allen wrench 5 mm
• Allen wrench 4 mm
• Flat screwdriver
How to install
1. Install the UST lens as described in
2. Mount both lens hoops (2x R8798056) around the lens and secure with 2 bolts, 2 washers and 2 nuts.
Make sure that the hoop is mounted under 45°.
50 R5914481 /02 XDX
"Installation of a lens", page 47.