Mount The Projector In The Reinforcement Frame - Barco XDX Series Installation Manual

Image 3–3
8. Remove both the U-shaped plates and the four foam corner pieces.
Image 3–4 Removing corner foam blocks
9. Lift the projector from the wooden pallet using a hoisting tool.
Save the original shipping carton and packing material, they will be necessary if you ever have to
ship your projector. For maximum protection, repack your projector as it was originally packed at the
factory.
The projector is delivered with a plastic cover inside the Lens Holder. This to prevent intrusion of
dust and foreign particles.
The projector is not delivered with a lens by default. If you also ordered a lens, it will be delivered in
a separate box. For lens installation, see

3.3 Mount the projector in the reinforcement frame

Reinforcement frame components
Unpack the reinforcement frame and built it around the projector.
"Installation of a lens", page
Installation preparations
47.
R5914481 /02 XDX 27