Table of Contents
Advertisement
NLSet up and connect
†Dishwasher
†Instructions
†Assembly instructions
†Guarantee
†mounting material
†Power cord
†Quick guide
Set up and connect the device
You can install your undercounter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If
you subsequently install the appliance
as a free-standing appliance, you must
secure the appliance against tipping
over, e.g. by screwing it to the wall or
installing it under a continuous
worktop that is firmly connected to the
adjacent cupboards.
Observe the safety instructions.
1.
Page 4
Observe the instructions for the
2.
electrical connection.
→ Page 15
Check the contents of the package
3.
and the condition of the device.
The required installation dimensions can be found
4.
in the installation instructions.
Level the appliance using the
5.
adjustable feet.
Pay attention to a firm position.
Install the waste water connection.
6.
Page 14
Install the drinking water
7.
connection. Page 14
Connect the device to the
8.
power.
14
Waste water connection
Connect the appliance to a waste water
connection so that the contaminated
washing water can be drained.
Waste water connection
to install
The necessary steps can be found in
1.
the supplied installation instructions.
Connect the drain hose to the
2.
connection nipple of the siphon
using the supplied parts.
Make sure that the drain hose is not
3.
kinked, crushed or tangled.
Make sure that the water does not
4.
flow out by a plug in the waste
water connection.
Drinking water connection
Connect the device to a drinking
water connection.
Drinking water connection
to install
NoteWhen you replace the
appliance, you must use a new water
supply hose.
The necessary steps can be found in
1.
the supplied installation instructions.
Connect the device to the drinking
2.
water connection using the
enclosed parts.
The technical data
→ Page 63 consider.
Make sure that the drinking water
3.
connection is not kinked, crushed
or entangled.
Advertisement
Table of Contents
