Table of Contents
Advertisement
Malfunction
E:90-01 lights up alternately.
Another error code
appears in the indicator
window.
E:01-00 to E:90-10
Washing result
Malfunction
Crockery is not dry.
Cause
Mains voltage is too low.
There is a technical
malfunction.
Cause
No rinse aid has been
used or the dosage is
set too low.
The program or program option
has no drying phase or a drying
phase that is too short.
TroubleshootingNL
To fix an issue
There is no error in the device.
Contact an electrician.
1.
Have the mains voltage and electrical
2.
installation checked by the
electrician.
Press .
1.
Unplug the appliance from
2.
the mains or switch off the
fuse.
Wait at least 2 minutes.
3.
Plug the appliance into a
4.
mains socket or switch on
the fuse.
Turn on the device.
5.
If the problem occurs
6.
again:
Press .
†
†
Close the tap.
†
Remove the plug from the
socket.
Contact customer
†
service→Page 61and
state the error code.
To fix an issue
Fill the rinse aid
1.
→
Page 29Bee.
Set the amount of rinse aid.
2.
"Setting the rinse aid
amount", Page 29
▶
Select a program with drying,
e.g. Intensive, Strong or ECO
programme.→Page 20
The drying result is reduced with
some option buttons, eg
Variospeed.
49
Advertisement
Table of Contents
