Table of Contents
Advertisement
NLSoftening System
3. NoteOnly use dishwasher
softening salt.
Do not use salt tablets. Do not
use table salt.
Place the softening salt in the
softening salt reservoir.
1
Funnel
Fill the water softening salt
reservoir completely with softening
salt. The water in the reservoir is
displaced and flows away.
Fit and close the lid of the
4.
reservoir.
Switch off water softening
If the refilling salt indicator bothers
you, for example if you use a
combined dishwasher detergent with
a salt component, you can switch off
the indicator.
Note
To avoid damage to the
appliance, only switch off the
water softening in the following
cases:
†The water hardness is maximum
times 21 °dH and you use a
combined dishwasher detergent
with salt substitutes. combined
combined dishwasher
salt replacement st
Depending on the
1
28
a
share with
offen can you
device version
according to the manufacturer's
instructions, only use up to a degree
of hardness of 21 °dH without
adding softening salt.
†The water hardness is 0 - 6
°dH. You do not need to use
softening salt.
Press.
1.
Approx. 3 seconds on
2.
to access the basic settings.
aThe display shows H:xx
to give.
aThe display shows
to give.
Press repeatedly until the
3.
display shows H:00.
To save the settings, press . for
4.
about 3 seconds
aThe water softener has been
switched on and the refill
softener salt indicator is
deactivated.
Regenerate the softening system
In order to maintain trouble-free
operation of the water softening system,
the device regularly performs a
regeneration of the water softening
system.
The softening system is regenerated in
all programs before the end of the
main wash cycle. This increases the
running time and consumption values
of, for example, water and electricity.
Busy-
reflected
press until
to press.
Advertisement
Table of Contents
