Impulse Hose - Stihl TS 400 Manual

STIHL TS 400
• Draw out fuel hose.
The parts are installed in reverse
order.
Note: Installation is facilitated by
coating the hose flange with a little oil.
The straight edge of the flange
must rest against the web of the
tank housing.
The fuel hose must not be buckled or
damaged when it is pushed under the
carburetor.
10.7

Impulse hose

- Remove carburetor, see 10.2.2.
• Disconnect spark plug terminal (1)
from spark plug.
• Remove ignition lead and stop
switch lead from holder (2).
• Unscrew the screws of the air
guide cover.
- Remove air guide cover.
• Draw impulse hose off connector.
• Press flange of impulse hose out of
the hole and pull out the impulse
hose.
The parts are installed in reverse
order.
Note: Secure a ground lead
between air guide cover and
housing.
46