STIHL TS 400
9.5
Handle mount
• Prise stopper out of rubber buffer.
• Unscrew the screw (1) in the
rubber buffer.
• Unscrew the screws (2) in the
handle mount.
• Remove handle mount.
• Prise rubber buffer out of handle
mount.
• Press rubber buffer in until outer
groove (1) engages chamfer (2)
in handle mount.
- Tighten the screws of the handle
mount with a torque of 8.0 Nm and
the screw in the rubber buffer with
6.0 Nm.
10.
FUEL SYSTEM
10.1
Air filter
The engine performance
deteriorates, fuel consumption
increases and starting is made more
difficult when the filters are soiled.
The air filter must be cleaned
when engine performance
declines.
- Remove coarse dirt around the
air filter.
• Close choke shutter by moving
choke lever upwards.
• Unscrew fastener for filter cover.
- Remove filter cover.
39