Hose/Connector; Control Valve - Stihl 029, 039 Service Manual

STIHL 029, 039
11.6.11

Hose/Connector

Top:
Hose on control valve
Bottom:
1 = Connector
2 = Hose
- Remove the handle housing –
see 8.1.1.
- Clean the cylinder and the area
around the control valve.
- Pull the hose off the nipple on the

control valve.

- Pull the connector out of the hose.
Install in the reverse sequence.
11.6.12 Control Valve
Top:
Cover mounting screws
Bottom:
Removing the clip
- Remove the handle housing –
see 8.1.1.
- Take out the cover mounting
screws and lift away the cover.
- Clean the cylinder and the area
around the control valve.
- Ease the clip away from both
sides of the cylinder.
Top:
Removing the O-ring
Bottom:
1 = Hose
2 = Control valve
- Remove the control valve from
the cylinder.
- Take the O-ring out of the hole in
the cylinder or off the control valve's
stub.
- Pull the hose off the control
valve's nipple.
- Test the control valve –
see 11.6.5.
77