Direct Power On; Scanner Settings - Epson DS-790WN User Manual

Menu Options for Settings

Direct power on

Turn on the scanner directly when the scanner is connected to the power source, without pressing the
power button.

Scanner Settings

Slow
Slows down the feeding speed whenever scanning. When set to On, the icon changes to
Enable this in the following situations:
❏ When originals jam frequently
❏ When loading thin originals
❏ When scanning different types or sizes of originals at once
❏ If you feel that the scanner is noisy
Double Feed Stop Timing
Set the operation when any double feed is detect.
❏ Immediate: Stops feeding immediately after any double feed is detected.
❏ After Eject: Originals detected as double feed are scanned as is, and the subsequent feed of originals
is temporarily stopped.
If the scanned image has no problem, you can resume scanning as is.
DFDS Function
Skips double feed detection once and continues scanning. When set to On, the icon changes to
Enable this to scan originals that are detected as double feeds, for example plastic cards or envelopes.
Paper Protection
Reduces damage to the originals by stopping scanning immediately when the following status is
detected.
❏ A feeding error for the originals occurs
❏ Originals are fed askew
Select the detection level to enable this feature. See the table below for details on each level.
Level
On-Low
On-Medium
On-High
>

Scanner Settings

Description
Lower the sensitivity to detect the skew of the originals.
Detect the skew of the stapled originals and the skew that On-Low could not
detect.
Increase the sensitivity to detect the skew of the originals.
173
.
.