Epson DS-790WN User Manual page 86

Scanning
>
Scanning Using the Scanner's Control Panel
6. Select
, check the Scanner Settings, and then change them if necessary.
You can change the settings such as Slow or DFDS Function.
7. Tap
x
.
Related Information
"Inserting and Removing a USB Drive" on page 21
&
Basic Menu Options for Scanning to a USB Drive
Note:
The items may not be available depending on other settings you made.
Image Type:
Select the color of the output image.
When you select the following, the scanner detects the color of the originals automatically and saves
the images using the detected colors.
❏ Color/Grayscale/B&W
Converts the scanned image into 24-bit color, 8-bit gray, or monochrome (black and white
binary). When this is selected, set the sensitivity to determine whether the original is grayscale or
monochrome when scanning a non-color original.
❏ Color/Grayscale:
Converts the scanned image into 24-bit color or 8-bit gray.
❏ Color/Black & White:
Converts the scanned image into 24-bit color or monochrome (black and white binary).
The available image types may vary depending on the File Format you selected. See the following for
more details.
"Available File Format and Image Type combinations" on page 91
File Format:
Select the format in which to save the scanned image.
When you want to save as PDF, PDF/A, or TIFF, select whether to save all originals as one file (multi-
page) or save each original separately (single page).
❏ Compression Ratio:
Select how much to compress the scanned image.
❏ PDF Settings:
When you have selected PDF as the save format setting, use these settings to protect PDF files.
To create a PDF file that requires a password when opening, set Document Open Password. To
create a PDF file that requires a password when printing or editing, set Permissions Password.
Resolution:
Select the scanning resolution.
>
Scanning to a USB Drive
86