Epson DS-790WN User Manual page 23

Scanner Basics
>
Control Panel
B
Displays menus.
You can add menu icons and change the display order.
C
Displays the presets list. You can load your presets and register new presets.
D
Switch tabs.
E
Displays the list of setting items. Select each item to set or change the settings.
Grayed out items are not available.
F
Starts scanning using current settings.
Icons Displayed on the LCD Screen
The following icons are displayed on depending on the scanner's status.
This icon indicates that you are on the home screen.
Returns to the home screen.
Displays the network connection status.
Select the icon to check and change the current settings. This is the shortcut for the following menu.
Settings > Network Settings > Wi-Fi Setup
This icon indicates whether or not the DFDS Function (Double Feed Detection Skip Function) feature is
enabled. When enabled, the icon changes to
This feature skips double feed detection once and continues scanning. Enable this to scan originals that
are detected as double feeds, for example plastic cards or envelopes.
This icon indicates whether or not the Slow feature is enabled. When enabled, the icon changes to
.
This feature slows down the scanning speed. Enable this to scan originals that are likely to jam, for
example thin paper.
>
Basic Screen Composition
The scanner is not connected to a wired (Ethernet) network or unset it.
The scanner is connected to a wired (Ethernet) network.
The scanner is not connected to a wireless (Wi-Fi) network.
The scanner is searching for SSID, unset IP address, or having a problem with a wireless (Wi-Fi)
network.
The scanner is connected to a wireless (Wi-Fi) network.
The number of bars indicates the signal strength of the connection. The more bars there are, the
stronger the connection.
The scanner is not connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.
The scanner is connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.
.
23