Large Size Originals - Epson DS-790WN User Manual

Specifications and Placing of Originals
Note:
To scan laminated cards, set the appropriate setting in the Epson Scan 2 window.
When you are using Document Capture Pro, you can open the window by pressing the Detailed Settings button on the
Scan Settings screen.
❏ To increase the accuracy of auto size detection, select the Main Settings tab > Document Size > Settings > Scan
laminated card. See the Epson Scan 2 help for details.
❏ Select the Main Settings tab > Detect Double Feed > Off. See the Epson Scan 2 help for details.
If Detect Double Feed is enabled in the Epson Scan 2 window and a double feed error occurs, remove the card from
the ADF and then reload it, tap DFDS Function on the control panel's screen to set it to On which disables Detect
Double Feed for the next scan, and then scan again. The DFDS Function (Double Feed Detection Skip function)
only disables Detect Double Feed for one sheet.
Related Information
"Required Settings for Special Originals in Epson Scan 2 Window" on page 109
&

Large Size Originals

Specifications of Large Size Originals
By using the Carrier Sheet sold separately and folding the originals in half, you can scan originals larger than A4
size, such as A3 or B4 sizes.
Size
Up to A3
>
Thickness
0.3 mm (0.012 in.) or less
(excluding the thickness of
the Carrier Sheet)
>
Placing Originals Large Size Originals
Paper Type
Plain paper
Fine paper
Recycled paper
54
Loading Capacity of the
Carrier Sheet
10 carrier sheets