Epson DS-790WN User Manual page 144

Required Settings for Scanning
Items
User name Attribute
User name Display Attribute
Email Address Attribute
Arbitrary Attribute 1 - Arbitrary
Attribute 4
Checking the LDAP Server Connection
Performs the connection test to the LDAP server by using the parameter set on LDAP Server > Search Settings.
1. Access Web Config and select the Network tab > LDAP Server > Connection Test.
2. Select Start.
The connection test is started. After the test, the check report is displayed.
LDAP Server Connection Test References
Messages
Connection test was successful.
Connection test failed.
Check the settings.
Connection test failed.
Check the date and time on your
product or server.
>
Making Contacts Available
Settings and Explanation
Specify the attribute name to display when searching for user names. Enter
between 1 and 255 characters in Unicode (UTF-8). The first character should be a-z
or A-Z.
Example: cn, uid
Specify the attribute name to display as the user name. Enter between 0 and 255
characters in Unicode (UTF-8). The first character should be a-z or A-Z.
Example: cn, sn
Specify the attribute name to display when searching for email addresses. Enter a
combination of between 1 and 255 characters using A-Z, a-z, 0-9, and -. The first
character should be a-z or A-Z.
Example: mail
You can specify other arbitrary attributes to search for. Enter between 0 and 255
characters in Unicode (UTF-8). The first character should be a-z or A-Z. If you do
not want to search for arbitrary attributes, leave this blank.
Example: o, ou
This message appears when the connection with the server is successful.
This message appears for the following reasons:
❏ The LDAP server address or the port number is incorrect.
❏ A timeout has occurred.
❏ Do Not Use is selected as the Use LDAP Server.
❏ If Kerberos Authentication is selected as the Authentication Method,
settings such as Realm (Domain), KDC Address and Port Number (Kerberos)
are incorrect.
This message appears when the connection fails because the time settings for the
scanner and the LDAP server are mismatched.
144
>
Cooperation between the LDAP Server an
Explanation
...