Table of Contents
Advertisement
RD-7505(A)_ENG_101115_RD-7505(A)_ENG 2010-11-16 오전 10:36 페이지 53
SETTING THE HDMI
HDMI SETUP
• HDMI(HDMI AUDIO OUT) : To output the digital audio signals from the HDMI MONITOR OUT connector.
• CEC(HDMI CONTROL) : To link operations with components connected to HDMI connectors and compatible with HDMI
• PWR(POWER CONTROL) : To link the power ON/OFF status of this unit to components.
• RETURN : To return to the previous menu.
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the desired item.
2.
Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to set the selected item as desired.
All manuals and user guides at all-guides.com
HDMI : AMP / THRU
CEC : OFF / ON
POWER : OFF / ON
RETURN
control.
When selecting the HDMI AUDIO OUT
• The HDMI connection can carry uncompressed digital
video signals and digital audio signals.
• Depending on whether the digital audio signals input into
the HDMI IN are output from the HDMI MONITOR OUT of
this receiver or not, you should set the HDMI AUDIO OUT
correctly.
AMP : Not to output the HDMI digital audio signals from
the HDMI MONITOR OUT of this receiver, meaning
↕
these signals are heard from the speakers
connected to this receiver.
THRU : To output the HDMI digital audio signals from the
HDMI MONITOR OUT, meaning these signals are
heard from the speakers of your TV.
■Note:
• When the HDMI AUDIO OUT is set to THRU, no sound
will not be heard from the speakers connected to this
unit(except ROOM 2 speakers).
When selecting the HDMI CONTROL
• The HDMI control function allows input selection of this
unit to be interlocked with the operation of the connected
components.
OFF : Not to use the HDMI CONTROL function.
↕
ON : To use the HDMI CONTROL function.
• When the HDMI CONTROL is set to ON, you can also use
the ARC(Audio Return Channel) function, enabling the TV
to send the audio signals to this receiver via a HDMI
cable.
■Notes:
• The HDMI control function may not work depending on the
connected component and its settings.
• To use the ARC function, the TV that supports the ARC
function of the HDMI 1.4 standards is required.
• For details on HDMI CONTROL and POWER CONTROL,
refer to "CONFIRMING THE HDMI FUNCTION" on page
35.
53
Advertisement
Table of Contents
