Table of Contents
Advertisement
RD-7505(A)_ENG_101115_RD-7505(A)_ENG 2010-11-16 오전 10:36 페이지 30
■Tuning in the previously locked channels.
① Tune in the channels to which the parental lock is applied
by performing direct search only.
• Then "LOCK _ " is displayed for several seconds.
② While displaying "LOCK _ ", input the password
(4-digit number) with using the NUMERIC (0~9) buttons.
• When you input the correct code, the current channel can
be heard(, not be unlocked).
• If the wrong password is input, "INCORECT CODE" is
displayed. In this case, input the password again by
performing the steps ① and ②.
• When "LOCK _ " disappears, repeat again from the above
step ①.
■Notes:
• For details on the password, refer to "When selecting the
PASSWORD SET" on page 32.
• You can also set the parental lock on the PARENTAL
LOCK menu.(For details, refer to "When selecting the
PARENTAL LOCK" on page 32.)
• The channels to which the parental lock is applied cannot
be tuned in by performing channel search or category
search.
All manuals and user guides at all-guides.com
30
Displaying SIRIUS information
• You can display SIRIUS information such as channel
name, artist name, song title and signal strength.
• In the SIRIUS mode,
• Each time the DISPLAY button is pressed, the display
mode changes as follows:
→Volume →Surround mode →Signal input → Channel name → Song title
Input source←Signal strength←Category←Composer name←Artist name ←
("SIRIUS")
("EXCEL(LENT)", "GOOD", "WEAK", "NO SIG(NAL)")
■Note:
• If the information on artist name, song title or category, etc.
is not available, it will not be displayed correctly.
■
Signal strength display mode
• If the reception is poor, you can check the signal strength of
the SIRIUS Satellite Radio signal and adjust the position of
the SiriusConnect Home antenna until "EXCEL(LENT)" is
displayed.
■
Error message and status
• If an operation takes longer than usual or an error occurs,
one of the following messages may be displayed.
Message
The SiriusConnect Home tuner is not
ANTENNA
connected properly. Check it.
Displayed while the encoding code is
UPDATING
being updated. Please wait.
Displayed while updating contract
SUB UPDATED
information. Please wait.
The signal cannot be received.
NO SIG(NAL)
Reposition your SiriusConnect Home
Tuner antenna.
The selected channel is not currently
LINKING
broadcasting. Select another channel.
The SiriusConnect Home tuner is not
CHECK SIRIUS
TUNER
connected properly. Check it.
Status
Advertisement
Table of Contents
