Table of Contents
Advertisement
RD-7505(A)_ENG_101115_RD-7505(A)_ENG 2010-11-16 오전 10:36 페이지 23
Continue
■When selecting the "DRC (Dynamic Range
Compression)"
• This function compresses the dynamic range of
previously specified parts of the Dolby Digital or Dolby
TrueHD sound track (with extremly high volume) to
minimize the difference in volume between the specified
and non-specified parts. This makes it easy to hear all of
the sound track when watching movies at night at low
levels.
■Note :
• In some Dolby Digital softwares, DRC setting may not be
valid.
→ AUTO : To adjust the dynamic range compression
↕
automatically
OFF : To turn off the DRC function
↕
MID
Higher compression
↕
→ MAX
• "AUTO" can be selected only while playing digital signals
from Dolby TrueHD program source.
■When selecting the "H.GAIN (Height gain)"
• You can adjust the front height channel level as desired.
L(Low) : To decrease the front height channel level
↕
M(Mid) : To output the front height channel sound with
↕
standard sound volume level.
H(High) : To increase the front height channel level.
4.
Repeat the above steps 2 and 3 to adjust other
parameters.
All manuals and user guides at all-guides.com
23
Adjusting each channel level with test tone
• The volume level of each channel can be adjusted easily
with the test tone function.
■Note :
• When the SPEAKER button is set to off, the test tone
function does not work.
1.
Enter the test tone mode.
• The test tone mode is displayed and will be heard from the
speaker of each channel for 2 seconds as follows:
→ FL
[→FHL] → C
[→FHR] →
Front
Front Heigt Center
Front Height Front
Left
Left
Right
←
←
SW
SL
Subwoofer
Surround Left
Surr.Back Left
• When the speaker setting is "NO", the test tone of the
corresponding channel is not available.
• ( ) : Possible depending on whether the surround back
speaker is set to 2ch("Lx2", "Sx2") or 1ch("Lx1",
"Sx1").
• [ ] : Possible only when the front height speaker("FH") is
not set to "NO".
2.
At each channel, adjust the level as desired until
the sound level of each speaker is heard to be
equally loud.
TUNE
• You can select the desired channel with pressing the
CURSOR UP(▲)/DOWN(▼) buttons.
3.
Cancel the test tone function.
FR → SR
Surround
Right
Right
←
SBR) ←
(SBL
Surr.Back Right
Advertisement
Table of Contents
