Table of Contents
Advertisement
M
4-4
AINTENANCE
NEVER USE SHARP OBJECTS AROUND
COILS.
Use a soft brush or vacuum brush to clean debris
from coils. Do not puncture coils! Do not bend
fins . Contact an authorized service technician
if a coil is punctured, cracked, or otherwise
damaged .
ICE in or on the coil indicates the refrigeration
and defrost cycle is not operating properly .
Contact an authorized service technician to
determine the cause of icing, and to make
adjustments as necessary . To maintain product
integrity, move all product to a cooler until
the unit has returned to normal operating
temperatures .
Evaporation Pan is Hot!
and poses risk of bodily injury
and protective eye wear when servicing. Turn off
evaporation pan heater, and allow pan to cool.
P/N 3141959_C
–
Always Wear gloves
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
CLEANING EVAPORATION PAN
The condensate water outlet for self
contained models empties into a limited
capacity evaporation pan .
Debris or dirt accumulation inside the condensate
evaporation pan or on the heater coil will
reduce the pan's evaporation capacity and
cause premature heater failure . The evaporation
pan waste water will overflow and spill onto the
floor if the heater is not properly operating .
Remove accumulated debris from the
evaporation pan . Wipe down heater coil with a
cloth and warm water . Be sure to remove any
dirt, debris or liquids from the heater coil .
Water introduced during cleaning will cause
the evaporation pan to overflow .
Advertisement
Table of Contents
