Replacing Solenoid Valves - Hussmann FNGSC-A Installation & Operation Manual

Dual temperature self contained island merchandiser
Table of Contents

Advertisement

P/N 3141959_C
4 . Remove condensate pan screws and
disconnect heater wires .
FNGSC8A Shown
5 . Take off the condensate pan and replace
heater .
FNGSC8A Shown
6 . Reverse the process and make sure
everything is in place .
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.

REPLACING SOLENOID VALVES

Unplug the power cords before servicing.
Parts may be ordered at Hussmann's Performance
Parts e-store:
https://parts.hussmann.com/
Call toll free: 855-487-7778
or
Required Tools:
• Screwdriver / Philips Tip
• 1/4" Allen Wrench
• Copper Tubing Cutter
• Blow Torch
1 . Remove product and place in a refrigerated
area . Make sure the power is off to the
case .
2 . Make sure there is no voltage in the
refrigerator . Remove rear lower panel .
FNGSC8A Shown
FNGSC-A Self Contained Merchandisers
5-7

Advertisement

Table of Contents
loading

Table of Contents