Table of Contents
Advertisement
S
5-6
ERVICE
3 . Remove front lower panel and take off the
electric enclosure box cover .
FNGSC8A Shown
4 . Disconnect the evap heater harness from
Wago connectors .
5 . Remove clip jiffies and replace the drain
heater . Ensure the harness routed as it was
previously .
P/N 3141959_C
REPLACING PAN HEATER
Unplug the power cords before servicing.
Parts may be ordered at Hussmann's Performance
Parts e-store:
https://parts.hussmann.com/
Call toll free: 855-487-7778
or
Required Tools:
• Screwdriver / Philips Tip
• 1/4" Allen Wrench
1 . Remove product and place in a refrigerated
area . Make sure the power is off to the case .
2 . Make sure there is no voltage in the
refrigerator . Remove lower panels .
3 . Slide out the condensing unit completely
(Fig B) . Be careful using the condensing
unit base to pull it out . Make sure not to
stress or interfere with other parts .
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
FNGSC8A Shown
FNGSC8A Shown
Advertisement
Table of Contents
