Table of Contents
Advertisement
I
1-2
NSTALLATION
LOCATION
Product should always be maintained at
proper temperature . This means that from the
time the product is received, through storage,
preparation and display, the temperature of the
product must be controlled to maximize the
life of the product .
B
E SURE TO POSITION SELF CONTAINED
MERCHANDISERS PROPERLY
These models have vented base panels to allow
air circulation through the condensing unit .
Allow for a minimum 30" clearance from walls,
merchandisers, and any other large objects near
the merchandiser's vented base panels (for self
contained models) . Blocking or restricting air
flow will adversely affect performance and may
damage the refrigeration system .
4 IN
30" Clearance
CLEARANCE
AIR
EXHAUST
P/N 3141959_C
.
AIR
INTAKE
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
MODEL DESCRIPTION
FNGSC models are island, spot display
merchandisers . Each self contained model will
have two self-contained units with one dual
circuited evaporator .
FNGSC models are designed for dual
temperature operation . These models
have upper glass on all four sides of the
merchandiser .
UNLOADING
Unloading from Trailer:
Lever Bar (also known as a Mule, Johnson
Bar, J-bar, Lever Dolly, or Pry Lever)
Move the merchandiser as close as possible to
its permanent location and remove all packaging .
Check for damage . Remove all separately
packed accessories . Improper handling may
cause damage to the merchandiser when
unloading .
To avoid damage:
1 . Do not drag the merchandiser out of the
trailer . Use a Johnson bar (mule) . Use a
forklift or dolly to remove the merchandiser
from the trailer .
2 . Use caution when moving case to
setup location . Use care to not damage
refrigeration system . Confirm there are
no refrigerant leaks during startup of the
case(s) .
Advertisement
Table of Contents
