Video Input Setup - Integra DTR-6.8 Instruction Manual

DTR-6.8_En.book Page 46 Wednesday, June 20, 2007 4:16 PM
First Time Setup—Continued

Video Input Setup

HDMI Input Setup
If you connect a video component to HDMI IN, you
must assign that input to an input selector. For example,
if you connect your DVD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD input selector.
If you've connected your TV to the AV receiver with an
HDMI cable, you can set the AV receiver so that com-
posite video, S-Video, and component video sources are
upconverted* and output by the HDMI OUT. You can set
this for each input selector by selecting the "- - -" option.
Composite video, S-Video,
component video
Composite video, S-Video,
component video
1
Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "1. Input/Out-
put Assign," and then press
[Enter].
The Input/Output Assign menu
appears.
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Input
46
HDMI
IN
OUT
HDMI
]/[ ]
3
Use the Up and Down [
buttons to select "2. HDMI Input,"
and then press [Enter].
The HDMI Input menu appears.
1–2. HDMI Input
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX
TAPE
TUNER
CD
PHONO
4
Use the Up and Down [
buttons to select an input selec-
tor, and use the Left and Right
[ ]/[ ] buttons to select:
IN 1: Select if the video component
is connected to HDMI IN 1.
IN 2: Select if the video component
is connected to HDMI IN 2.
IN 3: Select if the video component
is connected to HDMI IN 3.
- - -: Output composite video,
S-Video, and component
video sources from the HDMI
OUT. The video output signal
from the HDMI OUT is the
one configured in "Compo-
nent Video Setup" (see
page 47).
There are no assignments for TUNER.
5
Press the [Setup] button.
The Setup menu closes.
Notes:
• Each HDMI IN cannot be assigned to more than one
input selector.
• For composite video, S-Video, and component
video upconversion for the HDMI OUT, the HDMI
Monitor setting must be set to Yes (see page 45),
and the HDMI Input setting must be set to "- - -".
See page 25 for more information on video signal flow
and upconversion.
• When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See "Digital Input Setup" on page 49.
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
]/[ ]
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
]/[ ]