Integra DTR-6.8 Instruction Manual page 11

DTR-6.8_En.book Page 11 Wednesday, June 20, 2007 4:16 PM
Front & Rear Panels—Continued
bp
AC INLET
The supplied power cord is connected here. The
other end of the power cord should be connected to
a suitable wall outlet.
bq
PHONO IN
This audio input is for connecting a turntable.
br
REMOTE CONTROL
This (Remote Interactive) jack can be con-
nected to an jack on another
gra/Onkyo component. The AV receiver's remote
controller can then be used to control that compo-
nent. To use , you must make an analog audio
connection (RCA) between the AV receiver and the
other AV component, even if they are connected
digitally.
bs
COMPONENT VIDEO IN 1, 2, 3, and OUT
These component video inputs can be used to con-
nect AV components with component video outputs,
such as DVD players.
This component video output can be used to con-
nect a TV or projector with a component video
input.
bt
GND screw
This screw is for connecting a turntable's ground
wire.
ck
CD IN
This analog audio input is for connecting a CD
player's analog audio output.
cl
TAPE IN/OUT
This analog audio input and output are for connect-
ing a recorder with an analog audio input and output
(cassette, Mini Disc, etc.).
cm
GAME/TV IN
Here you can connect a game console, TV, etc.
Input jacks include S-Video, composite video, and
analog audio.
cn
CBL/SAT IN
Here you can connect a cable/satellite receiver, set-
top box, etc. Input jacks include S-Video, composite
video, and analog audio.
co
VCR/DVR IN/OUT
Here you can connect a VCR or DVR (digital video
recorder). Input and output jacks include S-Video,
composite video, and analog audio.
cp
DVD IN
Here you can connect a DVD player. Input jacks
include S-Video, composite video, and analog
audio. You can connect a DVD player's 2-channel
analog audio output or 7.1-channel analog audio
output.
cq
PRE OUT: FRONT L/R, CENTER,
SUBWOOFER, SURR L/R, and SURR BACK
L/R (20)
This 5.1/7.1 multichannel analog audio output can
be connected to the analog audio input on a multi-
channel power amplifier for when you want to use
the AV receiver solely as a preamplifier. The SUB-
WOOFER jack is for connecting a powered sub-
woofer.
-capable Inte-
cr
ETHERNET
This port is for connecting the AV receiver to home
automation equipment and external controllers.
cs
AC OUTLET (North American model only)
These switched AC outlets can be used to supply
power to other AV components. The type and num-
ber of outlets depends on the country in which you
purchased your AV receiver.
See pages 19-41 for connection information.
11