Video Input Setup - Integra DTR-40.1 Instruction Manual

First Time Setup—Continued

Video Input Setup

HDMI Input Setup
If you connect a video component to HDMI IN, you
must assign that input to an input selector. For example,
if you connect your DVD/BD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD/BD input selector.
If you've connected your TV to the AV receiver with an
HDMI cable, you can set the AV receiver so that
composite video, S-Video, and component video sources
are upconverted* and output by the HDMI OUT. You can
set this for each input selector by selecting the "- - - - -"
option.
Composite video, S-Video,
component video
Composite video, S-Video,
component video
1 Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ ]/[ ] but-
tons to select "1. Input/Output
Assign", and then press [Enter].
The "Input/Output Assign" menu
appears.
3 Use the Up and Down [ ]/[ ] but-
tons to select "2. HDMI Input",
and then press [Enter].
The "HDMI Input" menu appears.
44
HDMI
IN
OUT
HDMI
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
1–2. HDMI Input
DVD/BD HDMI1
VCR/DVR HDMI2
CBL/SAT HDMI3
GAME HDMI4
AUX FRONT
4
Use the Up and Down [ ]/[ ] but-
tons to select an input selector,
and use the Left and Right [ ]/
[ ] buttons to select:
HDMI1, HDMI2, HDMI3, HDMI4,
HDMI5:
- - - - -: Output composite video,
• "AUX" is used only for input from
the front panel jacks.
• Each HDMI IN cannot be assigned to
more than one input selector. When
HDMI IN have already been
assigned, you must set first any
unused input selectors to "- - - - -" or
you will be unable to assign HDMI
IN to input selector.
5
Press the [Setup] button.
The setup menu closes.
Notes:
• If no video component is connected to HDMI OUT
(even if the HDMI input is assigned), the AV receiver
selects the video source based on the setting of
Component Video Input.
• When an HDMI IN is assigned to an input selector, the
AV receiver will select audio from HDMI IN as a
priority.
See "Digital Audio Input Setup" on page 46.
• The Tuner input selector cannot be assigned and is
fixed at the "- - - - -" option.
• If you connect an input component (such as UP-A1
Dock that seated iPod) to the UNIVERSAL PORT
jack, you cannot assign any input to Port selector.
• Do not assign the component connected with the
HDMI input to the TV/Tape selector when you set
"TV Control" setting to "On" (see page 108).
Otherwise, appropriate CEC (Consumer Electronics
Control) operation is not guaranteed.
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
Select the HDMI IN to which
the video component has
been connected.
S-Video, and component
video sources from the HDMI
OUT. The video output signal
from the HDMI OUT is the
one configured in "Compo-
nent Video Setup" (see
page 45).