Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
9.3
Removing and installing the rear parking
aid warning buzzer - H15-
Removing
– Switch off the ignition and all electrical consumers!
– Remove bottom left trim panel of pillar B ⇒ Body Work; Rep.
gr. 70 .
– Disconnect plug connection -2-.
– Remove button rivets -arrows-.
– Disconnect parking aid warning buzzer -1-.
Installing
The installation occurs in reverse order.
9.4
Remove and install the front parking aid
warning buzzer - H22-
Installed in vehicles as of MY 09.
The front parking aid warning buzzer is located behind the right
dash panel insert.
Removing
– Remove dash panel insert
– Disconnect the plug from the warning buzzer.
– Remove expanding rivets -1- and remove warning buzzer
-2-.
Installing
The installation occurs in reverse order.
152
Rep. gr.94 - Lights, bulbs, switches - exterior
⇒ page 22
.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�