Button For "Start-Stop" System - Skoda Octavia II 2004 Workshop Manual

Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
It is connected to the data bus diagnostic interface - J533- (Gate‐
way) via the LIN data bus.
In the event of a failure, an entry is made in the event memory.
The start-stop system is switched off.
Note
After replacing, adapt (code) the new battery monitoring control
unit - J367- with ⇒ Vehicle diagnostic tester.
7.8

Button for "start-stop" system

Removing and installing the button for the start-stop system
⇒ page 163 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
20
Rep. gr.27 - Starter, current supply, CCS