Omron CJ Series Operation Manual page 60

1 Overview and Features
2
Move the sliders on the top and bottom of the Unit to the lock position to secure the Units. The
sliders should click into place.
3
Attach an End Cover to the Unit on the right end of the Rack.
Precautions for Safe Use
If the locking tabs are not secured properly, the connectors may become loose and not function
properly. Be sure to slide the locking tabs until they are securely in place.
Precautions for Correct Use Precautions for Correct Use
The End Cover that comes with the CPU Unit must be installed on the right end of the Unit. If the
End Cover is not installed, the Controller will not function properly.
1-24
Move the sliders to the back
until they click into place.
CJ-series Analog I/O Units Operation Manual for NJ-series CPU Unit(W498)
Slider
Lock
Release