BMW Wallbox Instructions For Use Manual page 61

6.3 Authorisation settings
The BMW Wallbox is set at the factory so that all charging cycles must be authorised using an app. If
you do not wish to have to authorise every charging cycle and enable free access to the BMW Wallbox
at all times, the DIP switch must be set to "OFF" (see figure on the right)
Default setting: Access to the BMW Wallbox and
charging cycle authorisation by app only.
Note: On the date of the sales launch, the
myBMW app will only be available in China.
Its launch in other countries is currently being
planned.
60
Free access to the BMW Wallbox without
authorisation by app before each charging cycle.