1. Manuals
  2. Brands
  3. BMW Manuals
  4. Automobile Accessories
  5. 65 50 0 418 002
  6. Installation instructions manual

BMW 65 50 0 418 002 Installation Instructions Manual

Retrofit bmw accessory menu acm for bmw 1 series (e81, e82, e87) bmw 3 series (e90, e91, e92, e93) bmw 5 series (e60, e61) bmw 6 series (e63, e64) bmw x5 (e70) bmw x6 (e71)
Hide thumbs Also See for 65 50 0 418 002:
Table of Contents

Advertisement

Quick Links

Original BMW Accessories.
Installation Instructions.
Retrofit BMW Accessory Menu (ACM)
BMW 1 Series (E 81, E 82, E 87)
BMW 3 Series (E 90, E 91, E 92, E 93)
BMW 5 Series (E 60, E 61)
BMW 6 Series (E 63, E 64)
BMW X5 (E 70)
BMW X6 (E 71)
Installation instructions only valid for cars with M-ASK, CCC or CHAMP.
Retrofit kit No.:
Installation time
The installation time is approx. 1.75 hours. This may vary depending on the condition of the car and the
equipment in it.
Cars without AUX socket only
In general the car must be upgraded to the latest I stage status by flashing before starting the work. Depending
on the production age of the car and the work already carried out on the car, the programming times will vary,
which means that we cannot quote a specific time at this point. The installation time does not include any time
for programming/encoding, as this depends on the age of the car and the equipment in it.
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation and by
authorised BMW service companies.
In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with
the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and work
instructions in a rational order using the prescribed tools (special tools) and observing current health and safety
regulations.
In the event of any installation or function problems, restrict the troubleshooting session to about
0.5 hours for mechanical work or 1 hour for electrical work.
In order to reduce costs and avoid any additional expense, send a query immediately to the Technical Parts Support
via the Aftersales Assistance Portal (ASAP).
Specify the following information:
- Chassis number
- Part number of the retrofit kit
- A precise description of the problem
- Work steps already carried out
Do not archive the hard copy of these installation instructions since daily updates are made by ASAP!
© BMW AG, Munich
65 50 0 418 002
Retrofit BMW Accessory Menu ACM
65 50 0 422 701
Retrofit BMW Accessory Menu ACM
65 50 0 431 544
Retrofit BMW Accessory Menu ACM
65 50 0 441 372
Retrofit BMW Accessory Menu ACM
01 29 0 420 167
12/2007
(Z/Z)
1

Advertisement

Table of Contents
loading

Related Manuals for BMW 65 50 0 418 002

Summary of Contents for BMW 65 50 0 418 002

  • Page 1 These installation instructions are primarily designed for use within the BMW dealership organisation and by authorised BMW service companies. In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge.
  • Page 2 Ensure that the cables and/or lines are not kinked or damaged as you install them in the car. Costs incurred as a result of this will not be reimbursed by BMW AG. Additional cables/lines that you install must be secured with cable ties.

  • Page 3: Table Of Contents

    23. Customer information ............... . . 42 © BMW AG, Munich...

  • Page 4: Parts List

    Protective strips (for E70, E71 cars only) Fusible link 5 A (for E70, E71 cars only) Auxiliary cable (cars with SA 6FL only) Auxiliary cable (cars with SA 6FL only) © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 5: Preparatory Work For E81, E82, E87, E90, E91, E92, E93, E60, E61, E63, E64, E70 Cars

    Trim at the bottom right of the dashboard 51 45 181 Glovebox with casing 51 16 366 Undo the fuse holder on the right USB / AUX socket (cars with SA 6FL only) © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 6: Preparatory Work For E71 Cars

    65 83 010 Centre console trim 51 16 160 Controller Right side trims on the storage compartment 51 16 ... USB / AUX socket (cars with SA 6FL only) © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 7: Retrofit Cable Connection Diagram

    Leave connector plugged in E60, E61, E63, E64 cars only Remove connector and plug it into connector of cable to controller X10387 Plug casing 18-pin SW In the boot on the left © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 8 On front right of fuse holder PIN 5 Fuse holder Tie back on wiring harness Socket casing 3-pin SW Power supply to camera systems and / or USB interface Tie back on wiring harness © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 9: Connection Diagram For Auxiliary Cable And Connection Cable

    For E81, E82, E87, E90, E91, E92, E93 with CCC X13820 cars only On CCC with coding removed E60, E61, E63, E64, E70, E71 cars only To ACM unit C © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 10: Installation And Cabling Diagram For E81, E82, E87 Cars

    Plug casing 18-pin SW Plug casing 18-pin SW Socket casing 3-pin SW Earth post X490 Fuse holder Radio reception unit Controller USB / AUX socket (cars with SA 6FL only) © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 11: Installation And Cabling Diagram For E90, E91, E92, E93 Cars

    Plug casing 18-pin SW Plug casing 18-pin SW Socket casing 3-pin SW Earth post X490 Fuse holder Radio reception unit USB / AUX socket (cars with SA 6FL only) Controller © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 12: Installation And Cabling Diagram For E60, E61, E63, E64 Cars

    Auxiliary cable (cars with SA 6FL only) Plug casing18-pin SW Plug casing 18-pin SW Socket casing 3-pin SW Control display Radio reception unit USB / AUX socket (cars with SA 6FL only) Controller © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 13: Installation And Cabling Diagram For E70 Cars

    Plug casing18-pin SW Plug casing 18-pin SW Socket casing 3-pin SW Radio reception unit Control display Controller Earth post X490 Fuse holder USB / AUX socket (cars with SA 6FL only) © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 14: Installation And Cabling Diagram For E71 Cars

    Plug casing18-pin SW Plug casing 18-pin SW Socket casing 3-pin SW Radio reception unit Control display Controller Earth post X490 Fuse holder USB / AUX socket (cars with SA 6FL only) © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 15: To Install And Connect The Retrofit Cable

    Attach branch A10, SW 18-pin plug casing, of the retrofit cable A to the standard wiring harness (1) in the boot on the right using cable tie G. 071 0016 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 16 E on branch O1 of auxiliary cable O Connect branch A2, plug casing 3-pin SW, to branch P1 A3-A5 of auxiliary cable P. 090 1237 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 17 Disconnect plug X10387 from controller (1) and connect to branch A7, SW 4-pin plug casing. Connect branch A6 4-pin SW socket casing, to controller (1). X10387 090 1075 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 18 Disconnect plug X10387 from controller (1) and connect to branch A9, SW 8-pin plug casing. Connect branch A8 8-pin SW socket casing , to controller (1). X10387 087 0738 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 19: To Connect The Power Supply And Connection Cable For E81, E82, E87 Cars

    Fit the fuse holder (1). If there is no fusible link or a fusible link with less than 7.5 A in slot F13, fusible link L must be inserted. 090 1193 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 20 B to the installation site of the ACM unit. 087 0733 Z Remove coding (1) from branch B2 (WS 10-pin plug). Connect branch B2 to the CCC (2) as shown. 090 1039 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 21 Route branch B1 (10-pin VI connector) on the connection cable B to the installation site of the ACM unit. 087 0732 Z Connect branch B2 (10-pin WS connector) to M-ASK (1). 090 1038 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 22: To Connect The Power Supply And Connection Cable For E90, E91, E92, E93 Cars Only

    Connect branch A13, RT cable, to connector X11002, green 15-pin socket casing, PIN 9. Separate socket contact from branch A18, RT/BL cable, and using miniature connector H to branch A13. X11002 090 1192 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 23 Route the plug (2) on the existing signal cable (1) to the ACM unit. Route branch B1 (10-pin VI connector) on the connection cable B to the installation site of the ACM unit. 090 1096 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 24 E90, E91, E92, E93 cars only Remove coding (1) from branch B2 (WS 10-pin plug). Connect branch B2 (WS 10-pin plug) to the CCC (2) as shown. 090 1039 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 25: To Connect The Power Supply And Connection Cable For E60, E61, E63, E64 Cars

    If a fusible element of less than 7.5 A is present in slot 64 of the fuse holder (1) in the luggage compartment, fusible link J must be inserted. 060 1244 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 26 Connect branch B1 (10-pin VI plug) of connection cable B on the control display (1). Route branch B2 (WS 10-pin plug) to the footwell on the driver’s side. 060 1090 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 27: Connecting Voltage Supply And Connecting Cable For E70, E71 Cars

    Connect branch A18, RT/BL cable, to PIN 5 of plug X11003 (SW 6-pin). 070 0348 Z Insert fusible link N (5A) into slot F25 of the fuse holder (1). 070 0151 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 28 Connect branch B1, 10-pin VI plug of connection cable B on the control display (1). Route branch B2, 10-pin WS plug into the cutout of the glove compartment (2). 070 0160 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 29: Fitting Acm Unit And Universal Can Interface For E81, E82, E87 Cars

    Tie back branch A16, SW 18-pin plug casing, branch A20, SW 3-pin socket casing and possible excess cable lengths to the standard wiring harness. 087 0812 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 30 Secure Universal Can Interface D to the standard wiring harness using cable ties F. Connect branch A1, SW 32-pin socket casing, to Uni- versal Can Interface D. 087 0813 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 31: Fitting Acm Unit And Universal Can Interface For E90, E91, E92, E93 Cars

    F. Ensure that the steering column can still move freely as required. 090 1042 Z Affix the sealing strip I to the Universal Can Interface D. 090 1073 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 32 Attach Universal Can Interface D to the heating duct (1) behind the ACM Unit C using cable ties F. Connect branch A1, SW 32-pin socket casing, to Uni- versal Can Interface D. 090 1197 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 33: Fitting Acm Unit And Universal Can Interface For E60, E61, E63, E64 Cars

    Connect plug to ACM Unit C as follows: - Plug (2) on the existing signal cable (VI 10-pin) - Branch A15 (BL 26-pin socket casing) - Branch B2 (WS 10-pin plug) 060 1093 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 34 Secure the Universal Can Interface D to the trim (1) below the steering column using cable ties F. Connect branch A1 (SW 32-pin socket casing) to Uni- versal Can Interface D. 060 1247 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 35: Fitting Acm Unit And Universal Can Interface For E70, E71 Cars

    - Branch B2 (WS 10-pin plug) 070 0165 Z Wrap the ACM unit C with protective strips M. Secure ACM unit C to the instrument panel (1) using cable ties F. 070 0158 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 36 (1) in front of the ACM unit C using cable ties F. Connect branch A1, SW 32-pin socket casing, to Uni- versal Can Interface D. 070 0353 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 37: Concluding Work And Coding

    - Disconnect branch A15 and reconnect the previously disconnected cable to PIN 12 - Connect branch A15 to the ACM unit C and switch on the ignition The initialisation is complete. © BMW AG, Munich 01 29 0 420 167 12/2007...
  • Page 38 Using the “AUX Pos Level 1” button, select the position of the “AUX IN” button. Exit ACM Service Menu. All cars - Conduct a function test - Re-fit the car components as required © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 39: Retrofit Cable Circuit Diagram

    KCAN H KCAN H KCAN H KCAN H CAN Out Low KCAN L KCAN L KCAN L KCAN L CAN Out High CAN In Low Menu Menu CAN In High © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)
  • Page 40 Socket casing 3-pin SW Plug X10387 Controller Socket casing 12-pin SW X13813 All the designations marked with an asterisk (*) apply only to these installation instructions or this circuit diagram. © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 41: Auxiliary Cable Circuit Diagram (Cars With Sa 6Fl Only)

    Socket casing 4-pin SW, to USB/AUX socket 1* All the designations marked with an asterisk (*) apply only to these installation instructions or this circuit diagram. Cable colours Blue Brown Yellow Grey Black Transparent Violet White © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

  • Page 42: Customer Information

    For cars with SA6FL only (USB/audio interface) To play ACM audio through the car’s speakers, please disconnect any devices that may be connected to the USB interface (1). 070 0502 Z © BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z)

This manual is also suitable for:

65 50 0 431 54465 50 0 441 37265 50 0 422 701

Table of Contents