Creating Audio And Instrumenttracks 创建音频和乐器轨道 - PRESONUS Revelator io24 Owner's Manual

8
StudioOneArtistQuickStartGuide
Creating a New Song
8.3
8.3.2 Creating Audio and InstrumentTracks 创建音频和乐器轨道
4. Click on the Outputs tabs to enable anyor all of the outputs on your
Revelator io24. In the lower right corner,you will see the Audition
Select menu.This allowsyouto choose the output from which you
will audition audio files prior to importing them into Studio One
Artist. In general, you will want this to be the main output bus. 点
击输出选项卡，启用Revelator io24上的任何或所有的输出。在
右下角，你会看到试听选择菜单。这允许你选择输出，在将音
频文件导入Studio One Artist之前，你将从该输出进行试听。一
般来说，你会希望这是主输出总线。
Power User Tip: If you would like this I/O configuration to be the same every time
you open Studio One, click the Make Default button. 用户提示：如果你希
望每次打开 Studio One 的时候，这个 I/O 配置都是一样的，请点击 Make
Default 按钮。
1. In the upper left corner of the Arrange window, you will notice
severalbuttons.Thebuttonfurthestto theright is the AddTracks
button. Click on this button to open the AddTracks
编曲窗口的左上角，你会注意到几个按钮。最右边的按钮是
Add Tracks按钮。点击这个按钮可以打开 "添加音轨 "窗
口。
Revelator io24
Owner'sManual
window.在
116